WELCOME MY BROTHER

WELCOME MAZ BRO..!! ALL FREE FROM Ye@n'z Blog

Kamis, 22 Maret 2012

Fix Error U150 on Canon Printers (Solved U150 Printers Problem)

Canon recommends that you use only Canon ink cartridges with the printer. If a non-Canon cartridge is used, you may receive "Error U150" on your printer screen, indicating the presence of an incorrect cartridge and informing you that the printer may not be used. If so,
1. You must replace the cartridge before using your printer again, or
2. Power off then Turn on again Printer before using your printer
3. Use Canon Ink Catridge Original to Fix this problem permantly

Senin, 19 Maret 2012

Reset manual canon ip3600

3
How to Fix Problem Error 6c10 for Canon PIXMA IP4600, IP3600 etc. 


You can try manual reset your printer (this work, if appears message "waste ink absorber full" or "error 6c10")
  1. Start with printer off
  2. Press and hold Resume Button (triangle in the circle). 
  3. And click Power button. Green led should be on
  4. While holding the Power button, release the Resume Button.
  5. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  6. Click “Resume” for four times then soon click “Power” button, to confirm the selected action.
  7. Turn off the printer and turn on again


Please try to print, if not solved yaour problem..? email me or post here..!! thks My Bro 

Minggu, 18 Maret 2012

Fix error 6C10 on Canon Printers




This error could appear on these Canon Pixma printers: MP110, MP540, MP630, MP620, MP640, IP3600, MG5xxx...and other MultiFungtion canon series. error 6c10 problem on canon printer can fixed with manual reset metode, but you can try this solution before reset your printer.

Solution;
1. Power on printer and Press the "Resume" button (triangle symbol)  for 15-20 seconds, pls try print some document, if error 6c10 message appears go to next step.
2. Power off printer and check on the right: is the purge unit ok ? (chek, my be there's peace of paper ? try to cleaning the ink pad with tissue or piece of paper towel.
3. Cek other components approximately the parking area of carriage unit.
4. try to reset your printer, about how to reset your printer Read here. or search with google search engine or try to search here.


Jumat, 16 Maret 2012

Canon Pixma IP2000 printer

How to Fix Error Canon Pixma IP2000.



SELF TEST
This   printer   has   operations   that   can   be   performed   independent   of   the   computer.  To   perform   one   of   these   operations,   hold   down   the   resume   button.
     

Operations
Number of Flashes
Remarks
Cleaning
1 time
...
Nozzle check pattern
2 times
Load one sheet of A4 or larger paper.
Roller cleaning
3 times
Do not load paper or load A4 paper.

SERVICE MODE
            This   printer   has   a   service   mode   for   service-related   settings   and   for   performing   test   prints. The   operator   panel   buttons   are   used   to   enter   the   desired   service   mode.

SERVICE MODE OPERATIONS
  • With the printer powered off, hold down the RESUME button and press the POWER button.
  • While holding down the POWER button, release the RESUME button and press the RESUME Button twice in succession. Now release the POWER button. The indicator will blink in green and remain lit in green.
  • Select one of the following service mode functions by pressing the RESUME button the specified number of times.
Press Resume
Indicator
Functions
Zero times
Green
Power off the printer
1 time
Orange
Service test print
2 times
Green
EEPROM information print
3 times
Orange
EEPROM initialization
4 times
Green
Waste ink counter resetting
5 times
Orange
Destination settings
6 times
Green
Print head deep cleaning
10 times
Green
Return to menu selection
  • Execute the function you have selected (except for model setting) by pressing the POWER button. The printer will switch itself off after performing the function.
ERROR CODES
            Errors   will   be   displayed   on   the   host   computer   monitor. The   host   computer   should   be   set   to   ECP  or   Nibble   mode. Use   the   BJ   status   monitor   on   Windows95/98. 

Error State
Indicator
Blinks
(Errors that can be corrected by a user)


Paper out
Blinks in Orange
2 times
Paper jam
Blinks in Orange
3 times
Ink tank not installed
Blinks in Orange
4 times
Print head not installed
Blinks in Orange
5 times
Waste ink absorber full or platen waste ink absorber full
Blinks in Orange
8 times
Non-supported digital camera or digital video camera connected
Blinks in Orange
9 times



(Errors that can not be corrected by a user)


Carriage
Blinks in Orange & Green Alternately
2 times
LF
Blinks in Orange & Green Alternately
3  times
Purge unit
Blinks in Orange & Green Alternately
4 times
ASF cam sensor
Blinks in Orange & Green Alternately
5  times
Internal temperature
Blinks in Orange & Green Alternately
6 times
Waste ink absorber / platen waste ink absorber full
Blinks in Orange & Green Alternately
7  times
Print head temperature rise
Blinks in Orange & Green Alternately
8 times
EEPROM
Blinks in Orange & Green Alternately
9 times
PF position
Blinks in Orange & Green Alternately
13  times
PF cam sensor
Blinks in Orange & Green Alternately
14 times
Motor driver
Blinks in Orange & Green Alternately
17 times
Downloads:

Cartridges:

Parts:

Press the SKIP AD Pic before you go to the real Link.

Selasa, 13 Maret 2012

About Me

Amrin Hidayat (yenzip)biasa dipanggil Ye@n'z, Mulai membuat Blog pada awal tahun 2012, berawal dari keinginan memiliki blog sendiri, belajar menuangkan sedikit kemampuan dan pengalaman dalam bahasa tulisan (Ye@n'z Blog).


Dalam keseharian saya sambil bekerja di instansi pemerintah daerah Kabupaten Sumbawa, saya juga Menjual Alat-alat Komputer, Alat-alat infus Printer serta menerima Service Komputer, Printer, Notebook, netbook, dll, yang berkenaan dengan dunia komputer.

Saya mencoba mendalami service semenjak tahun 2001 dari pengalaman-pengalaman tersebut, berniat untuk mengumpulkan semua pengalaman saya yang Insya Allah akan saya tuangkan semuanya di Blog tercinta ini, sambil mengingat-ingat kembali segala pengalaman yang telah dilalui, Harapan saya dengan adanya Blog ini paling tidak secara pribadai bisa menjadi dokumentasi pengalaman hidup saya didunia Komputer. syukur Alhamdulillah jikalau pengalaman hidup ini memiliki arti bagi rekan-rekan Blogger semua. Wassalam..!!!

Temui saya di Facebook dan Google+

Senin, 12 Maret 2012

Mengatasi Waste ink pada printer Pixma MP480

Ink Absorber is Full pada Printer Canon PIXMA MP480 bisa di atasi dengan me reset printer dengan cara sebagai berikut;



Pertama Download software resetter terlebih dulu di SINI
Pastikan Kabel Power dan Kabel USB tetap tehubung ke Printer

Masuk ke Service Mode dengan cara lain: 
1. Printer dalam keadaan mati.
2. Tekan dan tahan tombol STOP/RESET kemudian tekan tombol POWER.
3. Tetap tahan tombol POWER kemudian lepas tombol STOP/RESET.
4. Lanjutkan dengan menekan tombol STOP/RESET 2x kemudian lepas kedua tombol secara bersamaan.
5. Blink berhenti printer dalam keadaan service mode.

Clik 2x untuk perbesar gambar

Lanjutkan dengan menggunakan Software Resetter Tool:
1. Extract File mp258resetter.rar yang telah di download. click 2x file mp258.exe
2. Click tombol Reload untuk mendapatkan Port USB yang baru.
3. Sediakan kertas 3 lembar pada baki kertas  kemudian Klik tombol MAIN pada software reseter.
4. Tunggu hingga proses print selesai.
5.Tekan tombol "EEPROM Clear" untuk mereset EEPROM (menghapus history printer).
6. Kemudian Tekan tombol EEPROM tunggu hingga printer selesai mencetak.
7. Matikan printer, kemudian nyalakan Printer sudah siap digunakan lagi,
.

My Great Web page